Wilde Analysis Ltd

engineering by analysis

  • Home
  • Industries
    • Aerospace & Defence
    • Industrial Equipment
    • Oil & Gas
    • Automotive & Off-Road
    • Marine & Subsea
    • Plastics, Composites & Rubber
    • Chemical & Process
    • Medical & Healthcare
    • Rail
    • Civil & Geotechnical Engineering
    • Metals
    • Renewable Energy
    • Consumer Products
    • Nuclear
    • University & Research
    • Electronics & Electrical
  • Capabilities
    • Design Simulation
      • Structural Analysis (FEA)
      • Fluid Dynamics (CFD)
      • Computational Electromagnetics (CEM)
      • Thermal Management
      • Wind Microclimate Assessment
      • Geotechnical Analysis
      • Design Optimisation
    • Manufacturing Process Simulation
      • Additive Manufacturing & 3D Printing
      • Metalforming & Heat Treatment Simulation
      • Plastic Injection Moulding Simulation
      • Plastic Packaging & Extrusion Simulation
      • Process Integration
    • Safety & Reliability Analysis
      • Design for Reliability (DFR)
      • Reliability, Availability, Maintainability & Safety (RAMS)
      • Risk Based Inspection (RBI) Analysis
      • Hazard Analysis
      • QRA & Consequence Analysis
      • Functional Safety
      • Alarm Systems Management
      • Control Room Design
  • Software
    • Design Simulation
      • ANSYS
      • ANSYS Discovery
      • Flownex
      • PLAXIS
      • Geotechnical Tools
    • Manufacturing Process Simulation
      • ANSYS Additive Manufacturing
      • ANSYS Polyflow
      • DEFORM
      • Moldex3D
    • Safety & Reliability Analysis
      • ReliaSoft Reliability Analysis
      • ReliaSoft Reliability Management
      • ReliaSoft Synthesis Enterprise Portal (SEP)
      • ReliaSoft Product Suites
      • ReliaSoft XFRACAS
  • Consulting
    • Capabilities
      • Design Simulation (FEA, CFD & CEM)
      • Manufacturing Process Simulation
      • Safety & Reliability Analysis
      • Design Code Assessment
      • Design & Test
      • Software Tools
    • Services
      • Project Options
      • Staffing & Secondments
      • Gap Analysis
      • Technology Transfer
      • Technical Support
      • Training
    • Assurance
      • Experience
      • Certifications & Associations
      • Quality & Environmental Management
      • Cyber Security & Data Protection
  • Training
    • Software Product Training
      • ANSYS
      • ANSYS Discovery
      • DEFORM
      • Flownex
      • Moldex3D
      • PLAXIS
      • ReliaSoft
    • Design & Simulation Training
      • FEA Principles
      • CFD Principles
      • Fluid Mechanics Principles
      • Design by Analysis
      • Fatigue Assessment
      • Design for Electromagnetic Compatibility (EMC)
      • Design for Metal Additive Manufacturing
      • Design for Injection Moulding
      • Mold Flow Results Interpretation
    • Safety & Reliability Training
      • Alarm Systems Management Aligned with EEMUA
      • Control Room Design with EEMUA 201
      • Functional Safety: IEC 61508 / 61511 – Safety Instrumented Systems (SIS) for Process Industries
      • Functional Safety: IEC 61513 – Instrumentation & Control for Systems Regarding Safety in Nuclear Plants
      • Hazard & Operability Studies (HAZOP) – Introduction
      • Process Safety Management
      • Design for Reliability – Introduction
      • Fault Tree Analysis – Introduction
      • RAM Analysis – Introduction
  • Support
  • Resources
  • About
    • Our Company
      • Senior Management
      • History
      • Careers
      • Community Support
      • Legal Notices
    • Assurance
      • Experience
      • Certifications & Associations
      • Quality & Environmental Management
      • Cyber Security & Data Protection
      • Privacy Policy
    • What’s On
      • Training & Events Calendar
      • Webinars, Seminars, Conferences & Exhibitions
      • News
      • Blogs
  • Contact
  • LinkedIn
  • Twitter
  • Facebook
  • YouTube
  • Blog
  • +44 (0) 161 474 6886
  • LinkedIn
  • Twitter
  • Facebook
  • YouTube
  • Blog
  • +44 (0) 161 474 6886

Control Room Design aligned with EEMUA 201

Home »Training » All Safety & Reliability Training

loading...

Control Room Design aligned with EEMUA 201
  • Details
  • Agenda
  • Venue
Wilde Analysis Training Facility
Whitworth House, 28 Charles Street
Stockport
SK1 3JR
Venue Details »
  • 29th October 2019 - 30th October 2019
    9:00 am - 5:00 pm

Introduction

Control room design is a two day course that will introduce the up to date guidance on control room design. It is aimed at people engaged in reviewing existing control rooms or designing new or modified control rooms.

The role of the Control Room Operator in managing risks of modern process plant is indisputable. Detecting deviations early, diagnosing the causes reliably and responding promptly and appropriately all contribute to the avoidance of major accidents and reduces reliance on automated systems. To do this, Control Room Operators need to maintain good situational awareness. Their ability to perform this critical role will depend on them being healthy and alert.

Control room design can have a big influence on the ability of the Control Room Operators to perform their role effectively. In particular:

  • A good quality HMI can ensure they have the data they need in a useful format;
  • The working environment can affect health and alertness;
  • Physical design and provision of equipment can support effective communication.

The tuition is aligned with the 3rd Edition of EEMUA 201 published in 2019, a leading guide to good practice for all aspects of control room design issued by the EEMUA (Engineering Equipment and Materials Users Association) (https://www.eemua.org/). Wilde was instrumental in developing this latest edition of the guidance along with active involvement of the EEMUA membership, experienced control room operators, ergonomists, designers and the HSE.

Participants can purchase a copy of the book recommended by the HSE –  ‘Control Rooms: A guide to their specification, design, commissioning and operation’ Publication EEMUA 201 (Edition 3)’ from the EEMUA shop here >>

Who Should Attend?

Managers, designers, supervisors and operators

Duration

2 Days

The course commences at 9:00am and finishes at approximately 5:00pm.

Course Fee

First booking: £1000

Includes lunch and refreshments.

Registration / Further Information

Please contact us to discuss if this course is suitable for your requirements and to book your place(s). Simply:

  • Complete the form opposite
  • Call us on +44 (0) 161 474 6886
  • Email us at training@wildeanalysis.co.uk

Alarm Systems Management Training Course

Taking place the day after the Control Room Design course, this concise one-day session delivers simple and practical guidance to managers, designers, supervisors and operators on how to recognise and deal with typical human-factor problems involving alarm systems. Its scope covers many sectors, including the energy, process, transport and utilities industries. Further information / registration >> 


Training Services Overview >>

Location

Venue:   Wilde Analysis Training Facility (Stockport)

Address:
Wilde Analysis Training Facility, Whitworth House, 28 Charles Street, Stockport, SK1 3JR

Description:
Wilde Analysis Ltd. Whitworth House 28 Charles St Stockport Cheshire SK1 3JR+44 (0)161 4747479 WildeAnalysis.co.uk  

Introduction

  • How does control room design influence process safety risk?
  • Human factors;
  • The deign process;
  • Management of change;
  • Justifying control room upgrades.

Control building design

  • Location vs risk;
  • Building features
  • Control room size;
  • Control room working environment.

Console design

  • Furniture and equipment selection;
  • Console desk size;
  • Chairs;
  • Console arrangements;

Human Machine Interfaces (HMI)

  • HMI features;
  • Design process;
  • Use of colour, symbols and objects;
  • Types of display;
  • Navigation;
  • Alarm management (reference EEMUA 191).

Related issues and emerging topics

  • Accessing control systems from outside of the control room;
  • Training and competence;
  • Maintenance;

Wrap up

  • Developing a human factors integration plan;
  • Evaluating design (including existing control rooms);
  • Final questions.

Registration / Further Information

Please refer to our Privacy Policy regarding how we may process any personal data you submit within this form.

  • Events

    • » Moldex3D R17 Feature Review in 60 Minutes | Moldex3D Webinar
    • » Avoid Lightweighting Disappointment Through Poor Choice of Materials | ANSYS Granta Webinar
  • News

    • » First Moldex3D Authorised Certification Centre Plastic Moulding Training Provider in the UK
    • » Shot Peening Modelling in DEFORM V12.0 | DEFORM News
    • » Switch to dongle-less licensing with the PLAXIS CONNECT Edition V20
    • » New Edition of EEMUA Guidance for the Designing of Control Rooms
    • » DDEFORM V12 Release Announcement | DEFORM News
  • Latest Tweets

  • Contact Details

  • Wilde Analysis Ltd.
    Whitworth House
    28 Charles St
    Stockport
    Cheshire
    SK1 3JR

  • t: +44 (0)161 4746886

© 2019 Wilde Analysis Ltd

UK Web design & hosting by BFI®

    • Home
    • Industries
      • Aerospace & Defence
      • Industrial Equipment
      • Oil & Gas
      • Automotive & Off-Road
      • Marine & Subsea
      • Plastics, Composites & Rubber
      • Chemical & Process
      • Medical & Healthcare
      • Rail
      • Civil & Geotechnical Engineering
      • Metals
      • Renewable Energy
      • Consumer Products
      • Nuclear
      • University & Research
      • Electronics & Electrical
    • Capabilities
      • Design Simulation
      • Manufacturing Process Simulation
      • Safety & Reliability Analysis
    • Software
      • Design Simulation
      • Manufacturing Process Simulation
      • Safety & Reliability Analysis
    • Consulting
      • Capabilities
      • Services
      • Assurance
    • Training
      • Software Product Training
      • Design & Simulation Training
      • Safety & Reliability Training
    • Support
    • Resources
    • About
      • Our Company
      • Assurance
      • What’s On
    • Contact

Cookies

We use cookies as set out in our privacy policy. By using this website, you agree we may place these cookies on your device Find out more