Training at Locations that Suit You
We can run our training courses at one of our classroom centres, onsite at your premises or online through virtual tuition.
Please contact us to discuss which option best suits your requirements.
Venue Details »- 29th June 2016 - 30th June 2016
9:00 am - 5:00 pm - 26th October 2016 - 27th October 2016
9:00 am - 5:00 pm - 10th June 2020 - 11th June 2020
9:00 am - 5:00 pm - 18th November 2020 - 19th November 2020
9:00 am - 5:00 pm
This training course provides an in-depth overview of the various dynamic analysis types available within Ansys Mechanical. If your design will undergo any type of motion, the concepts presented in this course will equip you with knowledge critical to a successful design. It can be challenging to take the information within a design or test specification and from that know what type of analysis needs to be performed.
By combining a mixture of theoretical background along with practical guidance and examples, this course will enable you to choose the type of analysis most pertinent to your needs, while giving you confidence in understanding the results and making design decisions based upon them.
Following completion of this course, the student will be able to:
- Understand the differences within each dynamic analysis type.
- Choose the proper dynamic analysis for virtually any application.
- Know when and how to apply damping for a given dynamic analysis.
- Use modal analysis to assist in understanding how a structure may respond to various applied forces.
- Use efficient modeling and analysis techniques to solve complex dynamic problems within reasonable time constraints.
- Interpret the results of the analysis with confidence and a greater understanding.
Who Should Attend?
Mechanical Engineers, Design Engineers and Designers working with moving structures.
Prerequisites
Completion of the Ansys Mechanical Getting Started course is required or significant experience with using the software.
Typical Learning Pathway
Duration
2 Days
The course commences at 9:00am and finishes at approximately 5:00pm.
Course Fee
£980, including lunch and refreshments.
Online Training Option
An online course is also available. Please contact us for details.
Registration / Further Information
- Complete the form opposite
- Call us on +44 (0) 333 996 9930
- Email us at training@wildeanalysis.co.uk
We can also run this course on a date of your choosing or as a bespoke course. Please let us know if you are interested in this option.
All Training Courses
Location
Venue: Wilde Analysis Flexible Training Options
Description:
Training at Locations that Suit You
We can run our training courses at one of our classroom centres, onsite at your premises or online through virtual tuition. Please contact us to discuss which option best suits your requirements.Classroom Training Facilities
Manchester Area Whitworth House 28 Charles Street Stockport SK1 3JR Cambridge Church Farm Barn 15 High Street Longstanton Cambridge CB24 3BPCourse Topics Include:
- Introduction to Dynamic Analysis
- Damping and its application to various analysis types
- Modal Analysis, included damped modal and Cyclic Symmetry
- Linear Perturbation Analysis as a method of establishing prestress
- Full and Mode-Superposition Harmonic Analysis, including prestress
- Response Spectrum Analysis, Single- and Multi-Point
- Random Vibration Analysis
- Full and Mode-Superposition Transient Analysis, including prestress
- Component Mode Synthesis (CMS) for Modal and Harmonic analysis
Sessions
Session 1
- Module 01: Introduction
- Workshop 01.1: Flywheel
- Module 02: Damping
- Workshop 02.1: SDOF Oscillators
- Module 03: Modal Analysis
- Workshop 03.1: Plate with Hole
- Workshop 03.2: Bladed Disk
- Workshop 03.3: Valve Body
- Module 04: Modal Cyclic Symmetry Analysis
- Workshop 04.1: Bevel Gear
Session 2
- Module 05: Linear Perturbation Analysis
- Workshop 05.1: Perturbation of Two Beams
- Module 06: Harmonic Analysis
- Workshop 06.1: Fixed-Fixed Beam
- Module 07: Response Spectrum Analysis
Session 3
- Module 07: Response Spectrum Analysis (cont’d)
- Workshop 07.1: Suspension Bridge
- Module 08: Random Vibration Analysis
- Workshop 08.1: Girder Assembly
- Module 09: Transient Analysis
Session 4
- Module 09: Transient Analysis (cont’d)
- Workshop 09.1: Caster Wheel
- Workshop 09.2: Gantry Crane
- Workshop 09.3: Wire Bonder
- Module 10: Component Mode Synthesis
- Workshop 10.1: Blower Frame CMS