Webinar: Rule of Thumb of Gate Location in Injection Molding | Moldex Webinar
- 19th August 2020
9:00 am - 10:00 am
Date: 19 August 2020
Time: 9AM (BST)
There are some considered factors to decide the gate location in injection molding, such as flow balance, packing effect, weld line on the surface appearance, and avoiding hesitation. L/T ratio can be a quick solution to decide the number of gates and the position, though the type of material also needs to be considered. With injection molding simulation, all the factors’ impact can be easily discovered and even there is gate location advisor feature can be employed. In this webinar, you will find out how each factor influence the decision of gate location, how to optimise the number of gates, and the application in the real case.
Registration / Further Information
Simply choose one of the following options to receive further information or to register.
- Complete the form opposite
- Call us on +44 (0)161 474 6886
- Email us at events@WildeAnalysis.co.uk
Please note that this event is free to attend but registration is essential.
Next in Webinar Series: How to Run a Successful Warpage Analysis into the Part Design Phase. Further Information >
Details on how to join the webinar will be emailed to you once registered.
In this webinar, you will find out how each factor influence the decision of gate location, how to optimise the number of gates, and the application in the real case.